TURNIGY9X8Cv2-2,4Ghz

How to Bind Turnigy 9X Radio to the 9X Receiver

-----------------------------------------------
by Red.13

1. Have the 9X Radio turned OFF.

2. Insert the Bind plug into the last set of 3 pins marked as Bind on the Receiver.

3. Power up the Receiver. You will see the red LED, inside the Receiver, flashing at a pretty fast rate.

4. Press and hold the Bind button on the back of the 9X Radio.

5. Turn the 9X Radio ON. The LED inside the receiver will go solid ON indicating the Radio and Receiver are now bound together.

6. Release the Bind button on the 9X Radio and remove the Bind plug from the Receiver.

Test all channels. You are ready to fly.